OBD Inspector Training and Certification
Computer Based Training (CBT) Curriculum
Training Curriculum
SGS Testcom has developed a computer based training curriculum for all existing safety inspectors. The OBDII inspector certification training includes:
Introduction to NYVIP
Basics of OBDII
Performing Inspections Using the VIP Equipment
New York State Inspection Requirements (Part 79)
Maintenance and Basic Troubleshooting of the NYVIP Equipment
Generating and Interpreting Basic Reports
Customer Service Information
The entire training program is available on each NYVIP test system and provided on a CD shipped with each unit and is available online at the below link. The CD can also be viewed on any PC with CD playback capabilities. There is no cost to the inspector or the stations to take this computer based training. An inspector should review the material prior to taking the mandatory certification exam.
OBDII Certification Exam
All inspectors must pass a mandatory OBDII certification exam prior to inspecting OBDII vehicles in the NYVIP. The exam is only accessible through the NYVIP system in each station. The inspector must take the 25-question exam and pass with a score of 80%.
Inspectors that successfully pass the exam will be authorized to begin conducting official OBDII inspections.
|
SGS Testcom and A.T.T.S now offer advanced service training
courses. |
"Getting Monitors to Run & Pass" ONBOARD DIAGNOSTICS SECOND GENERATION (OBDII)
Develop the skills required to prevent comeback problems after OBD II emission
related repairs. This course covers the concepts and "real world" operation of
On-Board Diagnostics II, it also includes the latest changes developed due to
the nationwide implementation of Controller Area Network (CAN). This 4 night
class is designed for in-service technicians at all levels of experience.
Advanced level technicians will receive plenty of information to enhance their
diagnostic skills.
Subjects
"Generic" OBD II MODES 1-10:
Continuous Monitors, Non-Continuous Monitors, Conflicts between Monitors
Conditions needed to set Monitors to Ready
Trips, Drive cycles, Freeze Frame Data (FFD)
Diagnostic Trouble Codes (DTC's) and Malfunction Indicator Lamp (MIL)
Pending & Permanent Diagnostic Trouble Codes (DTC's)
Mode $06 data, OBDII counters & Exponentially Weighted Moving Average (EWMA)
Diagnosis and Repairing OBD II Failures:
Equipment for testing and diagnosing OBD II systems
Technical Services Bulletins and OEM WEBSITES
PCM Re-Programming
Cost: $ 295.00
Automotive Technician Training Center 718-492-0985
355 65th ST
Brooklyn, NY.11220
"If you want to learn something, you'll find a way, if you don't, you'll find
an excuse"
www.NYATTP.com
|
